From time to time everyone likes to renovate the decoration and change the air of the rooms of the house. Since not everyone can afford to make a complete renovation, including new furniture, one of the easiest ways to give a new look to an environment is to change the color of the walls. Today you will know how to put fabric on the wall :
And you do not even have to touch all the walls to renovate your corner, just give a little color to one and you'll turn your room into the best place in the world.
The first thing one thinks of when changing the color of a wall is paintbrush and paint, but depending on the size of the wall, this may not be one of the easiest solutions. Especially if you want to make the change on your own.
Did you know that you can apply fabric on walls ? For this is a very interesting alternative to renew the look of a room with ease and without much mess. We'll teach you how to do it!
Advantages of using wallcovering
One of the main advantages of lining a wall with fabric is that you yourself can apply without the need to hire skilled labor.
In addition, the fabric costs much less than the wallpaper. A 10-meter roll of wallpaper ranges from $ 60 to 300 reais, depending on the type of material and brand, and covers about 5sqm of wall. Usually 2 to 3 rolls are needed to finish the wall and the leftovers are hardly reused.
In the case of fabric, you can find prices ranging from $ 5 to $ 20 the meter with the standard measure of 1.40m wide, which ensures a smaller amount of fabric to finish a wall. It's economy right.
The fabric also has the advantage of being found in various prints and textures, the application is made only with white glue and water and not that specific glue for wallpaper that also has a higher cost.
If you get tired of the chosen pattern and want to change again, the fabric is much easier to draw than the wallpaper.
Which type of fabric to choose?
When buying fabric to coat the wall, give preference to 100% cotton tapestry or tricoline fabrics that have elastane in their composition, as they are resistant to light and heat.
Very fine fabrics like silk have a lower durability and require more care in the application, as they can tear easily. Flax gives a very sophisticated air to the environment, but also needs to be applied more closely.
The gorgorão or gorgurinho are also good options because they are very resistant and firm, which facilitates the application since they do not fold so easily, but because they are heavier, they can take off easily. Capriche in the glue if you will use this type of fabric.
It is important to see how the condition of the wall is in case you choose a light colored fabric that has a very fine texture because it will let you pass possible imperfections or the color of the paint if it is dark.
Before applying the fabric to the wall, test the mixture of water and glue to see if it stains, looses paint or fades. Being all right with the fabric, you can already put your hand in the dough.
Materials needed to put fabric on the wall
You will need the following materials to put fabric on the wall:
- White glue;
- Foam roll;
Step by step to put fabric on the wall
There are two ways to apply the fabric to the wall, you can apply it as if it were the wallpaper, ie by passing the diluted glue with water with the roll all over the surface and gluing the fabric over, or pasting the glue undiluted only at the edges of the fabric.
1. With diluted glue
In a container dilute the white glue (can be school glue) in water in the ratio 50/50. Mix well and it is ready to use.
Measure the fabric according to the height of the wall, leave leftovers on the sides, as your wall may not be completely straight, so you avoid that some part of it is without fabric.
Remove light mirrors, shelves, and any wall mount. Check the condition of the wall before starting, it is interesting to clean thoroughly with a damp cloth to remove dust and debris.
Ideally, start from top to bottom, with the roller well moistened in the diluted glue, pass the mixture over the entire surface of the wall and glue the fabric over.
To facilitate adhesion, you can tap a nail, thumbtack or bed bug in the corners just to firm the fabric, do not over-deepen the nail.
With a spatula you will eliminate possible imperfections and air bubbles.
After the fabric dries well, use the scissors and stylet to do the finishing by cutting the leftover fabric.
Instead of the switches, make a cut around the box so that the leftover is inside the wall, then just put the mirrors on top.
2. Do not dilute the glue
This method is quicker and easier, but may not be very suitable for very heavy fabrics, as the idea is to glue only to the edges.
With a nail, tack or stencil, attach the fabric to the wall and pass the glue directly onto the wall, without diluting it in water.
With a spatula, glue the fabric all the way around the wall and after very dry, you do the finishing by cutting the scraps with the scissors and the stylus.
Just remove the nails after at least a day to ensure that the fabric adhered well and will not loosen.
Tutorials to put fabric on the wall
Images and videos speak more than one text, so we've selected independent channel videos that show two different approaches to putting tissue on the wall:
Tips on cleaning and storing fabric on the wall
When cleaning the fabric, be careful not to take off any part of the wall. Vacuum cleaner to remove the bulk of the dirt and then wipe with a damp cloth with mild soap and water.
Attention: the cloth must be almost dry, because if you exaggerate the humidity, it will cause the glue to soften and the fabric loses its grip.
Photos of environments with fabric on the wall
And to inspire your choice, know more environments decorated with fabric and if you want to see more photos, know our article about wall cloth :
Picture 1 - Light fabric for a neutral decoration.
Picture 2 - Bring nature into the house in a fabric with foliage pattern.
Picture 3 - Color and life for the environment in a fabric with floral prints
Picture 4 - Another floral inspiration in the fabric
Picture 5 - This fabric still forms a beautiful landscape in the environment.
Picture 6 - Bet on color and versatile prints to apply in almost any environment
Picture 7 - Fabric for wall stamped with blue.
Image 8 - Fabric with Scandinavian print.
Picture 9 - Fabric for wall with arabesque.
Image 10 - Fabric for wall with pattern of nature.
Picture 11 - To decorate the dining room
Picture 12 - Cut out fabric to decorate part of the wall (like a picture)