Mold is nothing more than the proliferation of fungi, especially in hot and humid environments, places more than likely to install and reproduce. It is the mold that causes that smell of enclosed space or objects stored and that bothers so much. Learn how to get moldy smell today:
The point is that mold is not something that only bothers because of the smell, but it is also a problem for the health of the residents, especially for those who have respiratory allergies.
The good news is that there are good alternatives to stop the problem and prevent it from coming back, without you having to spend a lot or have a lot of work. Check out the tips we've gathered in this article to get rid of this problem.
Finding the origin of mold
The first step to get rid of the smell and also the mold is to locate where it is installed. On some occasions it is very easy to locate the problem, in general poorly ventilated and humid environments tend to develop fungi.
It is common to find mold inside wardrobes, especially in those little used areas such as luggage racks and high shelves, or in humid places such as the bathroom and laundry room.
In other cases it is more complicated to find the origin of the smell then it will be necessary to circulate through the environment looking carefully at each area. Check behind the furniture, carpets, underneath and around mattresses and boards.
How to Clean and Smell Mold
As mold is a fungus, for cleaning stains found in furniture, for example, you should use a solution of alcohol, vinegar or bleach and water. In a bucket add 100ml of bleach to every 1 liter of water and use a soft cloth soaked in this solution to clean stained spots on walls, tiles and furniture. Wipe the cloth with a dry cloth. If stains are difficult, repeat the operation with a soft sponge.
In fabrics it is more difficult to remove mold stains, as it is not always possible to add bleach. Look for specific products or use white vinegar.
In the case of clothes, you can use the following homemade recipe: mix 3 tablespoons of baking soda and 1 tablespoon of salt for each liter of water. Boil the clothes in this solution for about 1 hour, rinse well in cold running water and dry them normally.
Mix 1 cup of fabric softener and 1 cup of alcohol in 1 liter of water and apply this solution with a sprinkler on the laundry before ironing. Allow to dry completely before storing clothes.
If the problem occurs on mattresses, spread baking soda over the entire surface of the mattress and wait for about 30 minutes. Then just vacuum with a vacuum cleaner and the fungus and stench will be gone.
Ending the smell of mold
Mix one liter of alcohol with 1/3 of the same amount of clove and let stand for 24 hours. Clove has antifungal properties and also perfumes the environment. Use this mixture in a spray nozzle and apply inside the cabinets to get the scent away.
Care in the application, you should expect to dry well before storing objects and especially clothes, as the carnation loosens a dark coloration that can stain your clothes.
You can also spread sachets made of tulle or TNT with blackheads inside or even cedar wood pellets in the environment. Cedar balls eliminate bad smell and absorb moisture.
White vinegar works great indoors like closets and cabinets. Place a container with white vinegar inside the cabinet and leave overnight. On the next day, wipe a piece of cloth moistened with water throughout the furniture and allow it to dry thoroughly before storing the items.
Homemade recipes work well, but there is a very suitable product for wet areas or to clean and prevent the formation of mold that is Lysoform. If none of the above tips worked, Lysoform can solve the problem.
How to Make a Homemade Anti-Mold
The antimals found in the market are made with calcium chloride, a product that absorbs the humidity of the environment. You can prepare this type of product at home with the following materials:
- Plastic cups, one bigger than the other to be seated (you can use yogurt pots, disposable cups and even reuse the anti-mold containers bought in the market);
- Calcium chloride powder or granular (can be found in chemical stores);
- Filter paper for coffee grounds;
- Needle, pin or other piercing object;
- Elastic bands for tying;
Drill holes in the bottom of the smaller pot and fill it with calcium chloride. Snap the larger pot so that there is an empty space in the bottom. It is in this space that will accumulate the water coming from the humidity of the environment.
Put a piece of paper filter over and tie it around with a rubber band. Your anti-mold is ready.
If you are going to reuse the one that was bought in the market, open and dismantle all the packaging, throw the remainder of the granulated chloride in the trash and throw away the water accumulated in the bottom. Avoid contact with this water.
Replace the packaging, fill it with calcium chloride and wipe a piece of paper filter over the top with a rubber band. It's ready to use.
To avoid mold in environments
The problem with mold is that cares should be constant when you have a very humid environment or it will appear frequently. So follow some of the tips below to keep him from bothering you again:
- Try to air the environment as much as possible daily;
- Put chalk in the corners of the rooms, it helps retain moisture buildup;
- Give preference to waterproofing or anti-mildew inks to prevent moisture and stains on the walls.
Now that you already know how to tackle this problem that occurs even in busy homes, roll up your sleeves and get down to business! Your health deserves to bid farewell to mold.