Iron is an appliance that is part of our everyday life. After all, it is with his help that we can keep our clothes always smooth and free of wrinkles.
The problem is that, just like any other object we often use, over time it will accumulate dirt, in this case, fabric strands that stick together and stick to the bottom of the iron.
So to help you keep your iron clean, check out the tips we have:
11 Ways to Clean Your Iron
There are some products for sale that you can use to clean your iron, yet you can count on the help of homemade products using what you have at home. Among the products that you can use in iron cleaning are:
- Vinegar and salt;
- Baking soda and water;
- Warm water and neutral detergent;
- White tooth paste;
- White vinegar and lukewarm water;
- Sugar and detergent;
- Neutral detergent;
Now that you already know what products you can use in iron cleaning, let's show you how you can use each one and which place to apply.
Cleaning the iron plate
For the ironing board, before starting cleaning it is necessary to check whether it has nonstick or not. This is because you will need to use different products to clean the place. Come on?
If your iron plate does not have nonstick, you can use it in cleaning:
1. Vinegar and salt
For the vinegar and salt mixture, heat the vinegar and the salt, placed in a container, in equal amounts. Do not boil, the purpose is to just dissolve the salt. Then, with the help of a sponge, pass the mixture on the iron plate. Wipe gently until all dirt, including burn marks, is removed.
2. Sodium bicarbonate and water
For baking soda with water just make a paste and then pass on the iron with the help of a spatula. Then with a wet cloth, remove the paste and scrub to ensure cleaning. If your iron has steam vents you will need swabs to remove the bicarbonate paste from that region.
3. Warm water and neutral detergent
The solution of lukewarm water with liquid detergent works similarly to cleaning in the dishwasher, however, the goal is to leave the detergent more diluted as it will be mixed in the water. Dip a cloth or sponge into the mixture and place it on the iron plate. To finish it is enough to pass a damp cloth until well remove the soap.
4. White toothpaste
The toothpaste has a similar purpose as the bicarbonate paste. But you should use little paste in your iron, at most the equivalent of what you would put in your toothbrush. Rub with the aid of a cloth or sponge and then remove the toothpaste with the help of a slightly wet cloth.
5. White vinegar and warm water
Mix in equal amounts warm water and white vinegar. With the aid of a cloth, pass the product on the underside of the iron. To finish pass a cloth wet only in water.
Put a little salt on top of a blank sheet or old cloth. Turn on the iron at the maximum temperature and pass over the salt. Turn off the iron and allow to cool, then take a damp cloth to remove the grains of salt that have stuck together.
7. Sugar and detergent
Similar to the idea of baking with water, you should make a paste with the sugar mixture and neutral detergent. Leave the iron on warm temperature and wipe this paste. To remove the mixture, simply wipe with a clean, dry cloth.
Put some soap on a sponge and rub only on the most difficult dirt. It is a more interesting method for irons that do not have steam outlet, but if yours has, be careful not to drop saponaceous in these spaces.
Plate with non-stick
If your iron plate is non-stick, you will need to be more careful in cleaning, so you do not remove the iron. You can then use:
1. White vinegar and water
Mix half a glass of white vinegar with half a glass of water. Turn on the iron in warm temperature and with the aid of a soft cloth or sponge pass over the iron plate. To remove the mixture, just wipe with a clean, slightly damp cloth.
2. Water and neutral detergent
The idea is the same as vinegar with water, but you will need to scrub the iron longer, still using a sponge or soft cloth. Finally wipe with a slightly damp cloth until all detergent has been removed.
Cleaning the tank and the steam outlets
The water tank and the steam outlets on your iron also need to be cleaned. For this you can use white vinegar, a mixture of white vinegar with water or distilled water.
Fill one-third of the tank with the chosen product and then turn the iron on at the maximum temperature. Let the steam run out until all the liquid has evaporated.
To finish, wipe the steam outlets of the iron with a cotton swab as soon as it is back at room temperature.
Cleaning the iron base
The iron base is the easiest part to clean and all you will need is a slightly damp cloth in warm water. Rub the iron until all dirt has been removed and wipe clean with a soft, dry cloth.
- Before cleaning, always read the instruction manual and follow the manufacturer's recommendations;
- Always fill the iron with water when cleaning is complete. The tip is to leave the steam exits last and finish cleaning with a cotton swab.
- Be careful not to get burned. Whenever it is necessary to leave the iron warm or warm, wait for it to cool to wipe the dry cloth or wear gloves.
- Store the iron only when it is completely dry.
Now you already know how to clean your iron! Find out which method works best for you and tell us!