Fans are essential items for those hot days or for when we need a more airy environment. People who stay indoors are often those who suffer most from the effects of heat. Learn how to clean fan:
This is because in such places as, for example, office rooms, there are many electronic equipment, high power bulbs, printers, computers and they throw a lot of warm air into the environment.
The fan, be it ceiling or floor, is the solution to give some freshness in these cases or in days of very high temperatures. The point is they are collecting dust and debris as they are being used.
If you have never paid attention if your fan is dirty or if it is suitable for use, then take a look at the tips of our article today.
Why is it important to clean the fan?
The fan is an equipment composed of blades that make the air circular from a rotating movement. If these blades or other components of the apparatus are filled with dust or debris adhered to them, the powder is then dumped into the environment.
All this dust suspended in the air will bring or aggravate respiratory problems and allergies for those who live in it and that is why it is very important to keep your fan always clean and fit for use.
Materials required to clean a fan may vary depending on the type of equipment. If it is ceiling or floor, if it is portable or tower type. In general you will need the following items:
- Screwdriver or phillips wrench
- Dry cloth or absorbent paper
- Neutral detergent
Step by step to clean traditional fan
1. Turn off the power
Never under any circumstances carry out maintenance or cleaning on electrical equipment while they are plugged in. Therefore, to ensure your safety, do not just leave the button in the off position, it is important that the outlet is disconnected from the wall.
2. Dismantle the equipment
Traditional fans typically have a housing around the blades to protect users, but this casing prevents you from properly cleaning every nook where dust and dirt get in the way. For cleaning to be effective, disassemble your fan using the screwdriver and manufacturer's guidelines.
3. Clean the parts
Take out the bulk of the dirt with a soft brush. If the fan has not been cleaned for a long time or if it is exposed to grease, take out as much of the thicker dirt as possible in this step.
4. Wash the parts
Using water, neutral detergent and a soft sponge, thoroughly wash the parts until all the dirt has been removed. Do not throw water to parts that have electronic components. These should be cleaned with a soft brush or a dry cloth.
5. Dry the parts
Thoroughly dry all parts that have been washed in soapy water with a soft cloth or absorbent paper.
6. Mount the equipment
Mount the fan by fitting all the parts into their proper places and tightening everything correctly. If you want, put a drop of lubricating oil into the propeller socket to work better. When fitting the propeller, check the mark that indicates the side to be inserted.
Step-by-step to clean a ventilated tower
1. Switch off the appliance
Never clean electrical equipment while it is plugged in, so unplug the machine from the mains before cleaning.
2. Clean the outside
Using a cloth moistened with water and mild detergent, thoroughly wipe the outside of the fan. Try to clean in an open or well-ventilated area to prevent dust from causing respiratory problems.
3. Dismantle the grill
Make sure your fan model has a collapsible grate and remove it from place. Clean as much as you can by using a soft brush and a damp cloth with water and mild detergent. If your model does not have a removable grille, use a soft dry brush with soft bristles that will not damage the inside of the appliance.
4. Turn on the fan
During cleaning, to facilitate the removal of dirt, turn on the fan a few times for the dust to expel. Do not stand in front of the air outlet at this time so that dust and dirt do not come in contact with your airways.
5. Replace the grill
Put the grille back in place and wipe the outside of the fan with a damp cloth.
Step by step to clean ceiling fan
1. Switch off the appliance
Make sure the fan is off. To avoid accidents, we suggest that you turn off the circuit breaker that powers the equipment.
2. Use something to upload
It is not easy to assemble and disassemble a ceiling fan, so you will need to climb a ladder, bench or chair firmly and clean the fan components with it fixed to the ceiling itself.
3. Use a pillowcase
Attach a pillow case to each fan blade separately and press the fabric down. With one hand, grasp the opening of the pillowcase so that it holds all the dirt coming out of the blades. When finished, just turn the back cover and throw the dust in the trash.
4. Clean the blades
The blades are not fully fixed, so wipe them gently and avoid leaning on them or you can break the fan and fall. Use a cloth moistened with water and mild detergent.
5. Dry the blades
Dry blades thoroughly with a soft cloth or absorbent paper and your fan is now ready for use.
Important Tips for Cleaning Fan
- The fan blades may have sharp edges, so wipe them carefully so you do not get hurt.
- You can use the vacuum cleaner to remove the thick dirt from the blades and grilles of the appliance before washing the plastic or metal parts.
- Create a cleanup calendar. On hot days, when the equipment is used extensively, clean every 15 days (floor, conventional, or ceiling).
- In winter make monthly cleanings, since the equipment stays longer without use.
- Do not mount the fan with wet parts, always thoroughly dry the removed parts before putting them in place.
- If your fan has metal parts, invest in a metal polish so it will look new after cleaning.
- Always refer to the operating instructions of your fan before disassembling it.
Cleaning the fan is often one of the tasks that goes completely unnoticed. It is very common for people to forget that this equipment needs frequent cleaning or that it can cause illness if it is not sanitized. Now that you've seen our tips on how to clean your ventilation equipment, get to work!